Monday , 23 October 2017
Home >> C >> Components >> In Win 301

In Win 301


Introduction Design

Considering a new PC build? If so, we think you’re regulating one of dual elementary approaches.

You’re expected selecting your core components first, and anticipating a box that will accept them. Or you’re starting with a framework we unequivocally like, and selecting your components formed on what will fit. In Win’s 301 is improved matched to a latter scenario.

For starters, it’s a Micro-ATX/Mini-ITX mini-tower—no room for full-size ATX motherboards here. And while there is space inside it for vast graphics cards, a case’s compress proportions (a bit over 14 inches high and deep) meant that your storage options will be limited. You can implement a singular 3.5-inch drive, as good as a span of 2.5-inch tough drives or solid-state drives (SSDs). That’s copiousness for many folks, yet it’s a harder extent than in many cases this distance or a small bigger.

On a and side, we get a severely slick-looking home for your PC parts, deliberation a In Win 301’s $69 price. Available in possibly black or white (In Win sent us a latter for evaluation), a In Win 301 includes a tinted, tempered-glass side panel. And while a rest of a box is steel, not more-premium aluminum, it feels very plain for a budget-priced enclosure.

In Win 301

But know that a interesting entrance cost has a hitch: The box lacks any pre-installed fans. Unless we have some spinners left over from a prior PC build, you’ll have to bombard additional for a integrate of 120mm fans for intake and exhaust.

Also, while we get a satisfactory volume of room in this compress framework for tucking cables divided (behind a power-supply chamber, and to a right of a motherboard tray), a tangible routing routine is some-more difficult here than with many builds. That’s due to a plastic, removable wire defense and a miss of routing cutouts during a bottom of a motherboard area, where many front-panel, USB, and fan connectors are found.

Still, there’s a lot to like about a In Win 301. But either or not it’s a good choice for your subsequent PC build depends on a horde of variables. Let’s puncture into a sum and build out a exam complement in this snazzy-looking, low-cost case.



Design Exterior Features

In a ubiquitous sense, a In Win 301 looks many like any other midtower chassis, usually smaller. At 14.3 inches tall, 7.4 inches wide, and 14.6 inches deep, it’s distant from tiny, yet a box does take adult reduction table space or building space than many full-size towers. But again, that’s since we can’t residence an ATX motherboard here.

In Win 301 (Built Rear Angle)

Your motherboard options are MicroATX or Mini-ITX. If you’re aiming for an easier build with room to track and censor your cables, we’d advise adhering to a smaller of a dual house form factors, Mini-ITX. Contrary to that, we went with a MicroATX house from Biostar for a exam build to see what happens if we max things out. As we’ll get to in fact later, that left us changed small room to work, and no immediately apparent choice to censor a wire work during a bottom of a board. (Ultimately, though, we makeshift a solution.)

The front of a box is bustling with features. Here you’ll find block energy and reset buttons, apart headphone and mic jacks, and a span of USB 3.0 ports. Also here is a brightly backlit rectilinear section; it looks like a monochrome LCD panel, yet all it does is uncover off an In Win logo. (The trademark is still manifest here even when a complement is powered down and a lighting is off.) The backlighting here is red on a black chronicle of a 301 and blue on a white indication we tested, and it runs around a front ports, as well…

In Win 301 (White and Black Front)

The lighting looks some-more upscale than you’d design from a bill case, yet we couldn’t find any approach to switch it off when a PC is powered on, that is a problem since these lights are really bright, generally in a low or dim room…

In Win 301 (White Front Dark)

Our favorite underline of a In Win 301 is a dual vast side panels. That’s not wholly surprising, given that one of a chassis’ primary offered points is a tempered-glass row on a left. That square positively doesn’t disappoint. It’s tolerably tinted, extinguishing a interior when a lights are up, while display off any box lighting we competence install, by a hazed haze. A cosmetic frame along a bottom of a potion row should assistance keep a doorway from enormous if we strike it, while a tool-free fasten on a tip creates installing and stealing a left-side row utterly easy…

In Win 301 (Left Panel Latch)

But—and here’s something we don’t mostly see—the right side row is utterly nice, too. It’s steel, not glass, yet In Win has punched out some nifty hexagonal perforations for airflow (important, given that a box has no vents on a front row or a left side), while adhering to a elementary straight designation method. Like a potion panel, a steel right row sits in a mouth during a bottom of a case, and it gets cumulative around a span of vast ride screws adult top. It’s about as easy to mislay or reinstall as any box side row in new memory.

In Win 301 (Right Panel)

As gratified as we are with a case’s exterior, things get some-more difficult with a In Win 301 on a inside. Before we start pulling off a side panels, though, it’s value holding a demeanour during a bottom of a case. It’s home to a span of feet that run a full breadth of a case—and afterwards some, as they’re somewhat wider than a case’s steel frame…

In Win 301 (Bottom Dust Filter)

The cosmetic of a vast feet feels a small flimsier than we’d like, yet 4 rubber bumpers on them keep a framework from shifting around on a desk. And a vast removable dirt filter (the usually one found on a case) covers a honeycomb-perforated steel bottom of a chassis.

That’s it for what we can see on a outside; let’s get building inside. 

close
==[ Click Here 1X ] [ Close ]==